The government clarified the description of the internal Russian passport. Stamps on the issuance of a passport will no longer be cramped in it.
Changes to the legislation were made by Decree of the Government of the Russian Federation of February 18, 2014 N 122. It corrected something else. It is this legal act approves the regulation on the internal Russian passport.
The authorities decided to review the use of pages 18 and 19. Until now, the first of them was intended for marks on the Rh factor, blood type and TIN. The second was reserved for extradition stamps foreign passport, as well as information about the former inside Russian passports.
Now the two pages will have the same purpose:
The eighteenth and nineteenth pages of the blank passport are intended for making notes about the blood type and Rh factor of the passport holder, about his taxpayer identification number, about receiving the main document proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, as well as about previously issued basic documents, proving the identity of a citizen of the Russian Federation on the territory of the Russian Federation.
Obviously, the blood type and Rh factor do not change during life, and new marks will not be required for them. But passports - both Russian and international - have to be changed regularly. Now there should be no problems with entering the relevant information into the passport. There should be enough space.
Last Friday, the government decree was published by the Official Internet Portal of Legal Information. The document will enter into force 7 days after the date of publication, that is, March 1.
It does not work Edition from 18.11.2005
| Document name | Decree of the Government of the Russian Federation of 18.11.2005 N 687 "On approval of the samples and description of the forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and the official passport of a citizen of the Russian Federation certifying the identity of a citizen of the Russian Federation outside the territory of the Russian Federation containing electronic media of information" |
| Type of document | decree |
| Host body | Russian government |
| Document Number | 687 |
| Acceptance date | 06.12.2005 |
| Revision date | 18.11.2005 |
| Date of registration in the Ministry of Justice | 01.01.1970 |
| Status | It does not work |
| Publication |
|
| Navigator | Notes |
Decree of the Government of the Russian Federation of 18.11.2005 N 687 "On approval of the samples and description of the forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and the official passport of a citizen of the Russian Federation certifying the identity of a citizen of the Russian Federation outside the territory of the Russian Federation containing electronic media of information"
Decree
In pursuance of the Decree of the President of the Russian Federation of October 19, 2005 N 1222 "On the main documents proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, containing electronic media" (Sobraniye zakonodatelstva Rossiyskoy Federatsii, 2005, N 43, art. 4372) The Government of the Russian Federation decides:
1. Approve:
samples of forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and an official passport of a citizen of the Russian Federation, proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, containing electronic media, in accordance with Annexes No. 1 - 3<*>;
description of forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and a service passport of a citizen of the Russian Federation, proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, containing electronic media, in accordance with Appendix No. 4.
<*>Not given.
2. Expenses associated with the production of forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and a service passport of a citizen of the Russian Federation, proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, containing electronic media, and issuing these passports, are carried out at the expense of provided for these purposes in the federal budget for the corresponding year.
3. The association of state enterprises and organizations for the production of state signs of the Ministry of Finance of the Russian Federation shall ensure the production of blank passports of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and a service passport of a citizen of the Russian Federation, proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, containing electronic media , at the request of the Ministry of Foreign Affairs of the Russian Federation and the Federal migration service.
4. The Ministry of Foreign Affairs of the Russian Federation shall, in accordance with the international treaties of the Russian Federation, inform foreign states about the introduction in the Russian Federation of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and a service passport of a citizen of the Russian Federation, proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation containing electronic media.
Prime Minister
Russian Federation
M. FRADKOV
APPENDIX No. 4
to the Government Decree
Russian Federation
dated November 18, 2005 N 687
Description of the forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and a service passport of a citizen of the Russian Federation certifying a citizen of the Russian Federation outside the territory of the Russian Federation containing electronic media of information
1. Forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and a service passport of a citizen of the Russian Federation, proving the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, containing electronic media (hereinafter referred to as passport forms), are made according to a single sample that meets international requirements and standards for machine-readable travel documents.
2. Blank passports have a size of 88 x 125 mm and consist of a cover, endpapers glued to the cover, a plastic insert with an integrated microcircuit and paper pages.
Pages 1 and 2 of the blank passports are the front and back sides of the plastic insert, pages 3-38 are paper.
The page numbers of blank passports from page 3 to page 38 are located in upper corner at the fold line of the passport. These numbers (except for page 3) are duplicated using individual computer graphics at the bottom center of the pages.
Blank passports are sewn along the entire length of the spine with a thread with a dotted glow in UV radiation.
3. Blocks of blank passports and endpapers are made using special paper.
Pages 3 and 4 have a localized watermark visible through the light.
Pages 5-36 have a translucent image of a common watermark containing, when viewed in transmitted light, alternating dark and light volumetric outlines of words in Russian and English"Russia" and "Russia".
Pages 37 and 38 are equipped with a protective metallic thread that changes color depending on the angle of view. Separate sections of the thread are visible on the surface of page 37.
The paper of pages and endpapers contains 3 types of protective fibers.
4. The series and number of blank passports are reproduced:
on page 2 (the back of the plastic insert) - by laser engraving in black;
on pages 3-38, back flyleaf and cover by laser perforation. The image of the digits of the series and the number of blank passports is formed with the help of laser-burnt holes in paper and binding material that are visible through the light.
5. At the top of page 38 of the blank passports are the technical credentials of the manufacturer, consisting of a series and a 7-digit serial number, the image of which is made by letterpress in red ink.
6. Covers of blank passports are made of wear-resistant material and have the following colors:
cover of the passport of a citizen of the Russian Federation - dark red;
cover of diplomatic passport - green;
service passport cover - dark blue.
7. On the cover of the blank passports in the upper part there is an inscription in Russian and English:
"Russian Federation
Russian Federation".
plays in the center National emblem Russian Federation (hereinafter referred to as the coat of arms) on the heraldic shield.
Under the image of the coat of arms one of the following types of passport is indicated:
"Diplomatic passport
diplomatic passport";
"Service Passport
service passport".
It is allowed to place a special sign indicating the presence of an electronic information carrier in the passport form.
The inscriptions, the image of the coat of arms and the special badge are embossed with golden foil.
8. On the front flyleaf in the center of the frame, the image of the coat of arms on the heraldic shield is reproduced in multicolor. The ratio of the height of the heraldic shield to the height of the page is 1 to 3.
Above the coat of arms is the inscription:
"Russian Federation
Russian Federation".
Below the coat of arms is the following text:
on the form of a diplomatic passport of a citizen of the Russian Federation:
"The Ministry of Foreign Affairs of the Russian Federation asks all civil and military authorities of the Russian Federation and Friendly States to allow the bearer of this diplomatic passport, citizens (s) of the Russian Federation, who is sending (s) outside the Russian Federation, to pass without hindrance, and to provide him / her with all assistance.
The Ministry of Foreign Affairs of the Russian Federation requests all civilian and military authorities of the Russian Federation and Friendly States to allow free passage of the bearer of this passport, citizen of the Russian Federation, leaving the Russian Federation, and to extend to him/ her all the courtesies.
This diplomatic passport is the property of the Russian Federation and upon return to the Russian Federation is subject to return to the sending organization.
on the form of a service passport of a citizen of the Russian Federation:
"The Ministry of Foreign Affairs of the Russian Federation asks all civil and military authorities of the Russian Federation and Friendly States to render every possible assistance to the bearer of this passport, citizens (in / ke) of the Russian Federation, who is leaving the Russian Federation.
The Ministry of Foreign Affairs of the Russian Federation requests all civilian and military authorities of the Russian Federation and Friendly States to extend all the courtesies to the bearer of this passport, citizen of the Russian Federation, leaving the Russian Federation.
This service passport is the property of the Russian Federation and upon return to the Russian Federation must be returned to the sending organization.".
On the form of the passport of a citizen of the Russian Federation, under the image of the coat of arms, there is a rosette (an element consisting of closed and intersecting lines in a certain sequence).
The frame and the rosette (there is no rosette on the front flyleaf in the forms of diplomatic and service passports) are made by intaglio printing.
9. The plastic liner (pages 1 and 2) is a multi-layer, high-temperature molded structure that contains the microcircuit with the antenna provided for in paragraph 10 of this description.
From the sewn-in side of the plastic insert, a ribbon of special material protrudes, which is used to attach the insert to the passport blank.
Page 1 is the title page. The inscriptions on it are made against the background of a relief image of the coat of arms.
The name of the state is indicated at the top of the page:
"Russian Federation
Russian Federation".
At the bottom of the page, one of the following types of passport is indicated:
"Diplomatic passport
diplomatic passport";
"Service Passport
service passport".
At the bottom of the page is the following text:
"The passport contains 38 pages.
This passport contains 38 pages.".
Page 2, which is the back of the plastic insert, is designed to contain the personal data of the passport holder and consists of two parts:
the bottom quarter of the page - a machine-readable zone in which a machine-readable record is located, consisting of a combination of letters and numbers, containing, in accordance with international requirements and standards for machine-readable travel documents, the main information contained in this document;
the top three-quarters of the page is a visual zone in which the following details are placed, made by offset printing:
"Russian Federation / Russian Federation
Passport
Code of issuing state RUS / Code of issuing State
Passport No.
Surname / Surname
Given names
Citizenship / Nationality
Russian Federation / Russian Federation
Date of birth / Date of birth
Account
Place of birth / Place of birth
Date of issue / Date of issue
Authority that issued the document / Authority
Expiry date / Date of expiry
Owner's signature / Holder "s signature".
These details are filled in centrally by laser engraving. The same method is used to apply a black and white photograph of the passport holder measuring 30 x 40 mm, an image of the owner's signature and machine-readable lines in accordance with international requirements and standards for machine-readable travel documents.
In the attribute "Type / Tour" put:
R - for the passport of a citizen of the Russian Federation;
D - for a diplomatic passport;
S - for service passport.
In the upper right corner of page 2 is a diamond-shaped element with the image of the globe. Depending on the angle of view, the element changes its color from magenta to green.
It is allowed to protect page 2 with a lamination film with diffractive elements.
10. As an electronic carrier of information about the holder of a passport, a microcircuit with a contactless interface, which has a memory capacity of at least 64 kilobytes, is used as an electronic carrier of information.
The microchip stores graphic and textual information about the passport holder in a protected form.
11. Page 3 of the forms of the diplomatic and service passports is intended to indicate, if necessary, the official position of the bearer.
Along the page, below the image of the coat of arms and the border, which are made by intaglio printing, there is an inscription:
"Russian Federation
Russian Federation".
At the bottom of the page is the following text:
"Owner's signature
Holder"s signature".
On page 3 there are 3 elements that change color depending on the angle of view. The oval-shaped element labeled "RUS" changes color from magenta to green. Rainbow stripes appear on the two rounded elements.
12. Pages 4 and 5 contain information about the children of the passport holder.
Page 4 contains the following text:
"Children follow the owner of the passport:
Bearer of this passport is accompanied by children whose particulars are as follows:
Last Name, First Name Gender Date of Birth Account".
Surname, Name Sex Date of birth
If you need to make more entries about children, a link to another page of the passport is printed at the bottom of this page:
"See page.... / See page.... M. P.".
On page 4, the background grid is made using the Oryol printing method.
Page 5 contains the following text:
"Photographs of children / Photographs of children".
Below are 3 numbered frames 35 x 45 mm in size for placing in them photographs of children traveling with the passport holder. Under each photo, at the right corner, the place of printing is indicated - "MP".
13. On the back flyleaf of the passport form of a citizen of the Russian Federation, the following text is placed in a frame:
"Information for the passport holder
1. A passport during its validity period certifies the identity of a citizen of the Russian Federation when leaving the Russian Federation, staying outside the Russian Federation and entering the Russian Federation.
Any unauthorized changes made to this passport invalidate it and it is subject to withdrawal in accordance with the procedure established by federal law.
2. Passport holder, except in cases physical disability owner to do so, puts his signature on the third page.
3. The passport can only be used by the person whose metric data and photograph are placed on the second page of the document.
4. The exchange of a passport is carried out in the cases and in the manner prescribed by federal law.
5. In case of loss of a passport, it is necessary to immediately apply with an application to the nearest internal affairs department or diplomatic mission, consular office of the Russian Federation abroad.
6. The passport, with the exception of cases provided for by the legislation of the Russian Federation, is kept by its owner.
7. It is the responsibility of the passport holder to take care of obtaining foreign visas, as well as comply with the immigration requirements of other states.
8. A citizen of the Russian Federation who is outside the Russian Federation has the right to register with diplomatic representation or consular office of the Russian Federation.
The back flyleaf of diplomatic and service passports does not contain textual information.
The frame on the back endpaper is made by intaglio printing.
14. Pages 6-38 are for foreign visas and other official notices.
In passport blanks, additionally specially designed elements can be used to increase the safety of records or to protect the blank and the records made in it from forgery.
The Zakonbase website submits the Decree of the Government of the Russian Federation of 18.11.2005 N 687 "On approval of the samples and description of the forms of the passport of a citizen of the Russian Federation, the diplomatic passport of a citizen of the Russian Federation and the official passport of a citizen of the Russian Federation, certifying the identity of a citizen of the Russian Federation outside the territory of the Russian Federation, CONTAINING ELECTRONIC INFORMATION MEDIA" in the most recent edition. It is easy to comply with all legal requirements if you familiarize yourself with the relevant sections, chapters and articles of this document for 2014. To search for the necessary legislative acts on a topic of interest, you should use convenient navigation or advanced search.
On the Zakonbase website you will find a decree of the Government of the Russian Federation of 18.11.2005 N 687 "On approval of the samples and description of the forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and a service passport of a citizen of the Russian Federation who certify the identity of a citizen of the Russian Federation outside the territory of the Russian Federation CONTAINING ELECTRONIC STORAGE CARRIERS" in fresh and full version in which all changes and amendments have been made. This guarantees the relevance and reliability of the information.
At the same time, download the Decree of the Government of the Russian Federation of 11/18/2005 N 687 "On approval of the samples and description of the forms of a passport of a citizen of the Russian Federation, a diplomatic passport of a citizen of the Russian Federation and the official passport of a citizen of the Russian Federation certifying the identity of a citizen of the Russian Federation outside the territory of the Russian Federation containing electronic media INFORMATION" can be completely free, both in full and in separate chapters.
Sunday, 17 Aug. 2014The main document of a citizen of the Russian Federation causes not only a sense of pride in the few, but also an alarming interest, especially among caring passport researchers who have Russian citizenship...
Continuing the topics:
The official website of state orders posted information about a tender held at the end of April 2009 for writing specialized software for non-volatile chips for passports of citizens of the Russian Federation of the 2001 model.
As you know, two rectangular chips are placed in all Russian passports on the second page (they are visible through the page in the photo area). However, no information was previously entered into these chips (at least officially). Nevertheless, such a technological possibility initially exists, and the introduction of electronic passports was previously limited only by the lack of sufficient equipment necessary for writing / reading information from electronic media.
Apparently, the moment predicted for a long time has come, and soon we should expect legislative acts on the mandatory reissuance of passports. What information will be entered in electronic form, except for the standard full name. and dates of birth - it is still difficult to predict, but this is not clear from the description of the tender. Likely to be added biometric information and, possibly, critical medical data (blood type, chronic diseases - this will facilitate the provision of prompt medical care if necessary). But no one bothers to "sew" other information into the passport - about education and diplomas, about criminal records, about moving the state border, and even about recent calls from a mobile phone (technologically this is also possible).
Electronic passport promises citizens great benefits - the accelerated passage of various passport control, the speed of obtaining loans, obtaining tickets, accommodation in hotels, etc. etc. But negative aspects are also possible - for example, refusal to hire due to information about a disease that was once transferred or a criminal record.
“The main document of a citizen of the Russian Federation arouses not only a sense of pride in the few, but also an alarming interest, especially among caring passport researchers who have Russian citizenship ...
Not so long ago, I discovered, looking through the light on the page with the photo, it is also pages 3-4, two opaque blackouts under the photo, of a regular rectangular shape about 3x7 mm in size., well, you never know, which does not happen ...
On the passports of my relatives and friends, in the same places as in my passport, I saw the same thing, checking them against the light. Moreover, Russian passports were issued to them in different periods from 1999 to 2007, of course legally, by internal authorities in the departments of the Internal Affairs at the place of registration.
For clarification about the blackouts I found under the photograph, I turned to the passport office, but the inspectors "turned on the fool" and did not comment on the details I found.
I received explanations a little later from reliable sources directly related to this project, and therefore have the necessary information: (of course, everything below is just a version and nothing more...)
Our passports have electronic chips. They do not have any information about the owner of the passport (it is not needed), only a certain individual number. Why?!
Here is one version:
In the near future, in public places: metro, train stations, airports, receptions of government officials, transport, etc., along with the already familiar turnstiles, inconspicuous remote scanners will appear that can read these recorded numbers in the electronic chips of our passports, this will be done in the moment of passage of a person with a passport between the sensors of a remote scanner. The scanner reads the number, and if it is not in the wanted database for one reason or another, nothing happens. If the read number coincided with the number in the database, a certain signal follows and the citizen is taken aside for clarification by the officers on duty nearby.
Of course, we can only rejoice at the increase in indicators in the operational-search activities of the Ministry of Internal Affairs of the Russian Federation. However, there are a few "buts" about which, as always, they forgot to ask us:
These electronic components were installed in our civil passports without our knowledge, i.e. secretly, and therefore violated our civil right given to us by the Constitution of the Russian Federation to the secrecy of private and personal life.
We are deprived of the actual possibility of obtaining access to view the information contained in these chips, despite the right to freedom of information guaranteed by the Constitution of the Russian Federation. Moreover, the leadership of the Central Internal Affairs Directorate, through authorized passport inspectors, denies the very fact of installing electronic components in a civil passport.
Due to the increased political pressure of the power vertical in the Russian Federation, this system can easily be used to identify persons objectionable to any political regime in power and to protect the personal interests of the ruling officials and their entourage. That is, it is enough to enter the passport numbers of citizens - the organizers of a political action into the database, and with the reasonable adoption of simple police measures (an ordinary vindication of the identified organizers) - will achieve its actual disruption ...
The reason for everything is the Passport of a citizen of the Russian Federation, or rather its electronic filling.
This remote scanning system was invented for American herders and zoologists, in the mid-eighties, to use electronic scanners to track the movement of tagged animals and livestock through their habitat, including wintering. However, it did not take root due to the high cost ...
At the same time, the developed chips are resistant to physical damage, changes in natural temperatures, magnetic fields. However, they can be neutralized by microwave radiation. For example, processing in a home microwave oven.
A similar phenomenon in Russia is not surprising, especially since it has long been known about the use mobile phones as a portable beetle. But everything is extremely simple, largely due to the binding of the owner of the phone to the passport. The cell phone is equipped with a transmitter that regularly communicates with the operator's network, transmitting a built-in IMEI identifier, which is tied to the passport number.
The location of a cell phone can be determined by triangulation with a fairly high accuracy.
The operator equipment of any communication in our country has a built-in function of wiretapping and intercepting traffic in accordance with the requirements of SORM.
It is also impossible to exclude the presence of undeclared functions in the phone, for example, remote activation of the microphone.
Magnetic marks behind the photo in the new passport of a citizen of the Russian Federation, sample 1995
Expert opinion on the results of the study of magnetic marks behind the photo in the new passport of a citizen of the Russian Federation, sample 1995
In the photographs from the electron microscope x200, x2000, x4000 - the structure of marks under the photograph in the sample of the passport form of 1995. On x200 - cellulose fibers, glue, ferromagnetic powder on top. At x2000 - crystals of ferromagnetic powder are clearly visible. When comparing x4000 and the standard (barium hexaferrite), there is a clear similarity. Barium hexaferrite is widely used in the production of magnetic strips for information storage.
Currently, Russian citizens are issued new passports of the 1995 model. If you look at the light reverse side photo of the passport holder, you can see the presence of two elongated dark stripes. A microscopic study was carried out on a scanning electron microscope of the content of these labels.
In the picture with a magnification x200 (photo 1) cellulose fibers, glue High Quality, fine powder on top.
In the picture with a magnification x2000 (photo 2), particles of fine powder are clearly visible.
In the picture with a magnification x4000 (photo 3) - the presence of a fine powder of very high quality.
Based comparative analysis with a control sample (photo 4, standard, coarse grain) of barium hexaferrite (ВаFe 12 O 19), it was suggested that these materials are identical.
The complex oxide barium hexaferrite is widely used in the production of magnetic stripes for storing rewritable information. In particular, in one of the abstracts of Moscow University, this is said: “It has been established that during ultrafast quenching (~10 6 K / s) and subsequent annealing of the obtained amorphous material, an ultrafine magnetic powder of barium hexaferrite is released, the particle size of which is (< 0,3 мкм) позволяет использовать его в качестве материала for magnetic media with ultra-dense information recording”… [*]
The conducted research suggests that in the new passport of a citizen of the Russian Federation of the sample of 1995. the technology of writing and reading information on a magnetic medium (machine readable record) is used, however, a chemical study is necessary for the final conclusion.
Ilyin V. M.,
Doctor of Technical Sciences,
full member of MAISU
[*] L. M. Viting, V. V. Khasanov, O. G. Burtseva, S. V. Motylkova. CRYSTALLIZATION OF BARIUM HEXAFERrite POWDERS FROM SOME SOLUTIONS-MELTS CONTAINING BORIC ANHYDRIDE
Bulletin of Moscow University. Chemistry 2000, Volume 41, Number 1, Page 37
In 2013, the mass use of Russian chips in international passports begins.
By 2014, Russia will be ready to stop using foreign-made microchips in biometric documents. This was announced on January 21 during a press conference dedicated to the issuance of a foreign passport of a citizen of the Russian Federation using a domestic-made microcircuit, said the head of the Federal Migration Service of the Russian Federation Konstantin Romodanovsky. Clerk.ru correspondent Sergei Vasilyev reports from the scene.
Since 2013, Russian chips produced by the Zelenograd company Mikron will be used in the passports of citizens of the Russian Federation. The chip operates via a contactless interface and has a non-volatile memory with guaranteed period storage of information 10 years.
Under the terms of the contract, during 2013 Goznak will acquire and use 3.5 million domestic chips in passport blanks. (For comparison, for the whole of 2012, Goznak put into circulation 5.4 million blank passports). By 2014, it is planned to completely abandon the use of foreign chips in this area.
Recall that from June 1, 2013, the possibility of using the function of monitoring fingerprints in passport and visa documents is introduced. The Micron chip supports this feature.
According to Konstantin Romodanovsky, biometric documents today account for 75% of all newly issued international passports. There will be no external changes in the passport after the transition to a domestic chip, and this will not affect its price either, the head of the FMS promised.
“By next year, Russia will be ready to stop using foreign-made microchips in biometric documents.
This was announced today by the head of the Federal Migration Service Konstantin Romodanovsky. The Russian chip operates via a contactless interface and has a non-volatile memory with a 10-year information storage life. According to Romodanovsky, there will be no external changes in the passport after the transition to a domestic chip, and this will not affect its price either.
The international passport of the new sample until recently remained foreign not only in form, but also in content. The electronic chip with the owner's personal information was produced in the Netherlands. This year, the passport for traveling abroad becomes completely Russian. Only domestic microcircuits will be used in its production.
On the personalization line - this is the final stage of document production - passports are not just pasted with a photo of the owner, they are literally sewn into all the person's data, including biometric ones. From now on, they will be stored, including on a Russian chip.
Russian chips have been tested since 2005. They were tested for compatibility with electronic equipment and physical reliability. Today they are being produced on an industrial scale. So far, only one Russian enterprise is engaged in this - its facilities are located in Zelenograd.
Developers new document called one of the best documents in Europe. The new chip is no better and no worse than the foreign analogue, but the transition is still gradual to the Russian development. In such an important document all over the world, there is a question of state security. The personal information of Russians will no longer be able to fall into the hands of third countries.
Russian passport producers, on the other hand, will be less dependent on a foreign manufacturer. Dutch chips will still be used in Russia for some time, but over time, Russian developers - two more companies are working on the creation of similar chips - will have to completely conquer this market for themselves.
Several thousand people have already become the first holders of Russian foreign passports with the new technology. Approximately half of all issued passports in 2013 will already have a new chip inside. Externally, the passport will remain the same. None of the owners will even notice any changes."
Chips in the Russian passport
Russian passport, do we know everything about it?
Why is there a personal code and a magnetic chip in the passport?
The main difference of the new passport is not at all in the nationality column. it is not provided regulations. The rest of the issues in the media are not subject to coverage ...
WHY an empty column on 1 page above your signature - PERSONAL CODE?
WHY an empty column in the section "children" - PERSONAL CODE?
The code is the basis of subsequent identification, so the CODE is only the beginning.
But this is not the main thing. Now we look at page 3 - we see our photo. Turn over to the other side and look at the light. Well, what do you see two magnetic stripes? - one at head level, the other at shoulder level.
... as soon as you open the current “Description of the passport form of a citizen of the Russian Federation” (approved by Decree of the Government of the Russian Federation of July 8, 1997 No. 828, as amended on September 25, 1999, January 5, 2001) everything falls into place. No guides, no dirt!
In the last paragraph of paragraph 17 of “Descriptions ...” it is said: “Specially designed sewn-in or embedded elements can be used in the passport form, designed to increase the safety of the entries made or to protect the form and the entries made in it from forgery.” It is this “sewn-in element”, consisting of two strips, that we see under the photo in the new passport .....
So, these strips contain personal information for each of you. Information about registration in a psycho, drug, tube dispensaries, information about possible imprisonment, perhaps something else.
For example, devices for reading this information are installed on the Karelian-Finnish border.
But in the future it is planned to add more complete information to these plates, such as: fingerprints, all telemetry, as well as the character traits of a given citizen (a tendency to aggression, political extremism, etc.). Reading devices are supposed to be installed in every police station.
Although I would like to point out that...
"... above the photograph of a citizen are easily visible and amenable to shooting with an electron microscope, marks made of barium hexaferrite, which is widely used in the production of magnetic stripes for storing rewritable information.
In violation of the Decree of the Government of the Russian Federation, the passport of a citizen of the Russian Federation uses the technology of recording and reading information on a magnetic medium, which allows changing the information of the passport.
The Decree of the Government directly says: "A passport containing information, marks or entries not provided for by this Regulation is invalid."
Naturally, they do not write about it in the press and do not talk about it on TV. I will not say how I know this, to believe or not to believe is everyone's business - but I know that this information classified as secret."
But that's not all!!! Let's please Orthodox Christians .... we scroll further on our passport to odd pages 5,7, etc. We look at the page number in the passport, the page number is placed in a halo. We look at this halo carefully and what we see is three sixes (666).
Moreover... It was recently announced that the creation of the GLONASS system was completed, it is assumed that it will involve the technology of synchronizing and tracking the owner of a passport by a microchip sewn into it...
After all, 2,740,000 full-time people of the FSB, FSO, FPS, FAPSI, SVR, FMS ... and 2,970,000 staff should be doing something. people of the Ministry of Emergency Situations, the Ministry of Internal Affairs, the Internal Troops, the Ministry of Justice, arch control, the prosecutor's office ... (from the article Russia: statistics from the NDPR website).
Let us sum up a disappointing, but obvious conclusion. passport in his modern form, TIN, bank cards are tools of globalization, building a new world order, establishing total control over the individual.